机器人涂装线又称机器人涂装线。可分为手动机器人涂装线和链条自动机器人涂装线, 适合多规格线路板的插件工序。单边、双边插件变频无级调速电机、电子调速电机等；运行方式可分强制和自由节。

　　Robot coating line, also known as robot coating line. It can be divided into manual robot coating line and chain automatic robot coating line, suitable for the plug-in process of multi specification circuit boards. Unilateral and bilateral plug-in variable frequency stepless speed control motors, electronic speed control motors, etc; The operation mode can be divided into forced and free sections.

　　生产线机器人涂装线的组合及配置可任意变化，每台机长为3M，2.4M两种可随时变更，组成及配置，机器人涂装线速度可用变速旋钮调整所需输送速度，宽度可与电路板宽度随时高速，机身由铝合金构成，操作摇杆可轻易调整插件宽度30-320mm，基板与机器人涂装线接触面只有2.5mm。

　　The combination and configuration of the robot coating line on the production line can be changed arbitrarily. Each machine has a length of 3M and 2.4M, which can be changed at any time. The composition and configuration of the robot coating line can be adjusted with a variable speed knob to adjust the required conveying speed. The width can be adjusted at any time with the width of the circuit board. The body is made of aluminum alloy, and the plug-in width can be easily adjusted by operating the joystick to 30-320mm. The contact surface between the substrate and the robot coating line is only 2.5mm.

　　产品特点:

　　Product features:

　　1，手推机器人涂装线采用铝型材导轨作为输送介质，所以该线体摩擦力小,无噪音,也无需加任何润滑油,对所输送的印制板无任何污染。

　　1. The painting line of the hand pushed robot uses aluminum profile guide rails as the conveying medium, so the friction force of the line body is small, there is no noise, and no lubricating oil is needed, which does not pollute the printed circuit board being transported.

　　2，线体由若干个标准型2米单元组成。每个单元为相对独立的整体，工作高度720~760可调，照明采用30W直管荧光灯（灯管为飞利浦）。

　　2. The line body is composed of several standard 2-meter units. Each unit is a relatively independent whole, with an adjustable working height of 720-760. The lighting adopts 30W straight tube fluorescent lamps (with Philips tubes).

　　3，线体结构设计美观大方，机架采用模具生产，一致性好，矩形管、板材选用优质标准材料，采用喷塑工艺。整条线充分体现现代电子厂自动化生产特征。

　　3. The design of the wire structure is beautiful and generous, and the frame is produced using molds with good consistency. High quality standard materials are used for rectangular tubes and plates, and spray molding technology is adopted. The entire line fully embodies the characteristics of modern electronic factory automation production.

　　4，机器人涂装线配合基板输入机后能同本公司生产的各型号爪式波峰焊接机联机使用。从而组成一条自动化涂装焊接生产线系统。

　　4. The robot coating line, in conjunction with the substrate input machine, can be used online with various models of claw wave soldering machines produced by our company. Thus forming an automated painting and welding production line system.

　　·技术参数

　　·Technical parameters

　　1.机 架：采用40×40×1.5mm矩型钢管组焊制作，支脚配可调脚杯。

　　1. Rack: Made of 40 × 40 × 1.5mm rectangular steel pipes welded together, with adjustable foot cups for support legs.

　　2.台 板：采用δ=15mm的木夹板，面铺湖兰色防火板，T型胶条包边，宽B=1200mm。

　　2. Bedboard: Made of wood splints with a width of δ=15mm, covered with a lake blue fireproof board, T-shaped rubber strips wrapped around the edges, with a width of B=1200mm.

　　3.导 轨：采用手推机器人涂装线专用铝滑轨，导轨间距0-350mm可调，双边布置。

　　3. Guide rail: It adopts a hand pushed robot coating line dedicated aluminum slide rail, with adjustable guide rail spacing of 0-350mm and arranged on both sides.

　　4.照 明：灯架采用40×40×1.5mm矩型管制作，配40W日光灯管，双边布置。

　　4. Lighting: The lamp holder is made of 40 × 40 × 1.5mm rectangular tubes, equipped with 40W fluorescent tubes, arranged on both sides.

　　5.工艺卡：在灯架中间设一路工艺指导卡架，采用H型铝导轨制作，每工位布置一块300×400×1.5mm透明有机玻璃板。

　　5. Process card: Install a process guidance card holder in the middle of the lamp frame, made of H-shaped aluminum guide rails, and arrange a transparent organic glass plate of 300 × 400 × 1.5mm at each workstation.

　　6.元件盒挂条：在灯架下两边设两路元件盒挂条，选用30×30mm的角钢制作。

　　6. Component box hanging strips: Two component box hanging strips are installed on both sides under the lamp frame, made of 30 × 30mm angle steel.

　　7.机体颜色：机身表面采用电脑白色喷塑或客户自定颜色

　　7. Body color: The surface of the body is made of computer white spray paint or a color customized by the customer

　　本文由  机器人涂装线   友情奉献.更多有关的知识请点击 http://www.sdcjtz.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the robot painting line. For more related knowledge, please click http://www.sdcjtz.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

上一篇：自动式抛丸机在日常工作中如何使用？
下一篇：多工位焊接烟尘净化系统的使用