那么涂装电泳设备这个重生产品，它与其它的涂装办法比较有什么样的长处呢？就来说说它的好坏的地方吧：

　　So what are the advantages of coating electrophoresis equipment, a reborn product, compared to other coating methods? Let's talk about its pros and cons:

　　一、电泳涂装比其它涂装办法更环保更安全：电泳涂装是选用水溶性涂料，以水为介质，因而能够节约许多的有机溶剂，大大降低了对大气的污染和环境危害，安全卫生，也避免了火灾的危险；

　　1、 Electrophoretic coating is more environmentally friendly and safe than other coating methods: Electrophoretic coating uses water-soluble coatings and water as the medium, which can save a lot of organic solvents, greatly reducing air pollution and environmental hazards, ensuring safety and hygiene, and avoiding the risk of fire;

　　二、电泳涂装比其它涂装办法功率要高，因为能够回收利用，所以漆的损耗小，涂料的利用率可达95%，甚至更高。

　　2、 Electrophoretic coating has higher power than other coating methods because it can be recycled, resulting in less paint loss and a coating utilization rate of up to 95% or even higher.

　　三、涂装电泳设备可完成自动化连续生产出货，大大的提高了出产与劳动功率。

　　3、 The coating electrophoresis equipment can achieve automated continuous production and shipment, greatly improving production and labor power.

　　四、电泳涂装比其它涂装法的涂装漆膜要好：电泳涂装的涂膜均匀，附着能力强，涂装质量好，工件各个部位如内层、凹陷、焊缝等处都能取得均匀、滑润的漆膜，能够处理其他涂装办法对凌乱形状工件的涂装难题。

　　4、 Electrophoretic coating is better than other coating methods in terms of coating film: the coating film of electrophoretic coating is uniform, has strong adhesion ability, and has good coating quality. Various parts of the workpiece such as inner layers, depressions, welds, etc. can obtain a uniform and smooth coating film, which can solve the problem of coating messy shaped workpieces with other coating methods.

　　五、电泳涂装比其它涂装法的前期出资要高：电泳涂装的设备多，建厂费用高，耗电量也大，其烘干固化温度也比其它的要高些，涂料、涂装的管理杂乱，施工条件严峻，并且还需求进行废水处理，增加了废水处理的本钱。

　　5、 Electrophoretic coating requires higher initial investment compared to other coating methods: it has more equipment, higher construction costs, and consumes more electricity. Its drying and curing temperature is also higher than others. The management of coatings and coatings is chaotic, and the construction conditions are severe. In addition, wastewater treatment is also required, which increases the cost of wastewater treatment.

　　六、因为涂装电泳设备只能选用水溶性涂料，在涂装过程中不能随意的改动色彩，而涂料贮存过久就会稳定性欠好，或者沉淀结块，这也是涂装电泳设备有待改进的缺陷。

　　6、 Because only water-soluble coatings can be used for coating electrophoresis equipment, the color cannot be changed arbitrarily during the coating process. However, if the coating is stored for too long, its stability will be poor or it will precipitate and clump, which is also a defect that needs to be improved for coating electrophoresis equipment.

　　以上的内容均来自：机器人涂装线更多的精彩内容请点击我们的网站查看：http://www.sdcjtz.com我们会有更多精彩的内容为您呈现，感谢您的关注！

　　The above content is all from: Robot Coating Line. For more exciting content, please click on our website to view: http://www.sdcjtz.com We will have more exciting content to present to you. Thank you for your attention!

上一篇：环保伸缩喷漆房在设计上要注意什么？
下一篇：工业涂装流水线：涂装生产流水线的工艺流程