焊接产生的烟尘废气经吸气罩、柔性吸气臂瞬间收集后，由主管道进入集中式焊烟除尘器，柔性吸气臂的骨架类似于人的手臂，能够在吸气臂长度范围内的空间内悬停。在吸气罩的位置上设计了独特的旋转结构，保证了吸气罩能够通过任意方位对准焊接位置。

The smoke and exhaust gas generated by welding are instantly collected by the suction hood and flexible suction arm, and then enter the centralized welding smoke dust collector through the main pipeline. The skeleton of the flexible suction arm is similar to a human arm and can hover in the space within the length range of the suction arm. A unique rotating structure has been designed in the position of the suction hood, ensuring that the suction hood can be aligned with the welding position in any direction.

吸气罩通过流体设计和气流模拟，使吸气臂能够大量和范围的捕捉焊接过程中产生的烟尘。为了能够完全捕捉一个工位上产生的所有粉尘，也可以设计成顶吸罩，一般外形为四棱台形。

The suction hood allows the suction arm to capture a large amount and range of smoke and dust generated during the welding process through fluid design and airflow simulation. In order to fully capture all the dust generated on a workstation, it can also be designed as a top suction hood, usually in a pyramid shape.

烟尘收集后，烟尘废气在集中式焊烟除尘器内被高效净化滤筒阻截净化，部分大颗粒烟尘由于重力作用落入除尘器下部的灰斗，另一部分小颗粒烟尘在风机负压作用下附着在滤件外侧，脉冲阀在控制仪的控制下，每隔一定时间，自动对系统滤件由里至外进行反吹清灰，反吹过程中小颗粒粉尘落入灰斗内收集，积累到一定量的粉尘后，需要外运处理。洁净的气体穿过滤筒，进入排气口，在离心式通风机的作用下由烟囱排入到大气中。

After the collection of smoke and dust, the smoke and waste gas are intercepted and purified by efficient purification filter cartridges in the centralized welding smoke dust collector. Some large particles of smoke and dust fall into the ash hopper below the dust collector due to gravity, while another small particle of smoke and dust adheres to the outside of the filter under the negative pressure of the fan. Under the control of the control instrument, the pulse valve automatically blows back the system filter from inside to outside for cleaning at certain times, During the reverse blowing process, small and medium-sized dust particles fall into the ash hopper for collection, and after accumulating a certain amount of dust, they need to be transported out for treatment. Clean gas passes through the filter cartridge, enters the exhaust port, and is discharged into the atmosphere through the chimney under the action of a centrifugal fan.

集中式焊烟除尘器特点

Characteristics of centralized welding smoke dust collector

1、全自动的清灰系统，滤材清理更加方便快捷，不需要停止主机和其他操作。当滤筒表面饱和阻力达到一定的数值时，自动清洁功能开启，并在主机工作过程中依次对各滤筒单元进行单独反吹清洁，保障集中式焊烟除尘器始终处于良好的工作状态。

1. The fully automatic ash cleaning system makes filter material cleaning more convenient and fast, without the need to stop the host and other operations. When the saturation resistance on the surface of the filter cartridge reaches a certain value, the automatic cleaning function is activated, and each filter cartridge unit is individually backwashed and cleaned during the operation of the host, ensuring that the centralized welding smoke dust collector is always in good working condition.

2、滤筒采用进口聚酯纤维过滤材料，过滤效率达99.5%，滤筒使用寿命比普通滤料在正常使用条件要长很多，可选择配置不同滤料的过滤筒，如覆膜滤筒、阻燃滤筒，以满足不同性质烟尘的清除或空气过滤。

2. The filter cartridge is made of imported polyester fiber filter material, with a filtration efficiency of 99.5%. The service life of the filter cartridge is much longer than that of ordinary filter media under normal use conditions. Different filter media can be selected for configuration, such as membrane covered filter cartridge and flame-retardant filter cartridge, to meet the requirements of removing smoke and dust of different properties or air filtration.

3、滤筒更换方式为抽取式，不需要使用任何辅助工具，便可进行更换。左、右侧面均设有管路接口，用户可根据使用场合自由选择。滤筒 15°倾斜抽屉式安装，可使滤筒拆换更方便，而且集中式焊烟除尘器本体内不设置传动部件，减少了维修时间。

3. The replacement method of the filter cartridge is extraction type, and it can be replaced without the use of any auxiliary tools. There are pipeline interfaces on both the left and right sides, and users can freely choose according to the usage situation. The 15 ° inclined drawer installation of the filter cartridge makes it more convenient to disassemble and replace, and the centralized welding smoke dust collector does not have transmission components inside, reducing maintenance time.

4、所配置的高性能离心风机，吸风量大，吸力强。可通过控制板面上的数字仪表来观察过滤筒的运行状况。集中式焊烟除尘器，净化颗粒精度可达0.01μm，可以极大的改善整体空间烟尘污染状况。

4. The high-performance centrifugal fan configured has a large suction volume and strong suction force. The operation status of the filter cartridge can be observed through the digital instrument on the control panel. Centralized welding smoke dust collector, with a particle purification accuracy of up to 0.01 μ m. It can greatly improve the overall smoke and dust pollution situation in the space.

5、可根据安装空间的需要采用不同列数、行数的滤筒任意组合；设备过滤面积占用的空间小，可替用户节约大量空间资源，间接减少用户的一次性投资成本。模块式组合，大小不仅可以随意选择，还可以扩大原有组合，增加除尘机组。

5. Filter cartridges with different column and row numbers can be freely combined according to the needs of installation space; The filtering area of the device occupies a small space, which can save users a lot of space resources and indirectly reduce their one-time investment costs. Modular combination, the size can be freely selected, and the original combination can be expanded to add dust removal units.

更多的关于多工位焊烟除尘设备的问题或者详细的内容，请进入我们公司的网站：http://www.sdcjtz.com网站中会有很多的内容仅供参考。

For more questions or detailed information about multi station welding smoke and dust removal equipment, please visit our company's website: http://www.sdcjtz.com There will be a lot of content on the website for reference only.

上一篇：伸缩移动喷漆房非标定制设计要点
下一篇：集中除尘设备的除尘系统特点介绍